Find Dark Gray Wear-resistant Floor, Dark Gray Wear-resistant Floor Material, Dark Grey Cement Wear-resistant Ground on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Ground hardener system > Non-metallic Ground Hardener > Deep grey non-metal surface hardener

Deep grey non-metal surface hardener

Basic Info

Model No.: KS-H281

Product Description

Deep grey non-metal surface hardener


Product Description


Deep grey non-metal surface hardener Product Overview:

The Dark grey cement wear-resistant ground is suitable for the grounds of special places such as supermarkets, buildings, warehouses, auto showrooms, auto repair plants, and underground parking lots; areas with high mechanical performance requirements, mechanical, electronic, electrical, instrumentation with certain impact , pharmaceuticals, textiles, clothing, food, tobacco and Other corporate plant floor. Sites such as industrial plants, production plants, warehouses, logistics centers, garages, parking lots, supermarkets, etc. require that the ground cannot be sand and can withstand the rolling of various vehicles (such as cars, forklifts, carts, etc.), so these The floor of the site must not only have the flat and smooth decorative effect of the general floor protection system, but also have strong wear resistance and pressure resistance. Therefore, the corundum wear-resistant floor is a floor system that professionally solves the ground protection problems of heavy Machinery manufacturing plants, industrial and commercial warehouses, underground parking lots and other ground protection issues.Pu Polyurethane Rubber Track,Flexible Pu Rubber Track.


Features


Dark gray wear-resistant floor Product Features:

Impact resistance, heavy pressure resistance, good mechanical properties;
Dustproof, mildewproof, wear resistant, good hardness;
Heavy pressure resistance, strong abrasion resistance, no dust, enhanced ground oil resistance, resistance to penetration;
The appearance is smooth, bright and diverse;

Easy to clean and easy to maintain.Medium Gray Waterborne Epoxy Resin Floor.


Basic Requirements


Dark gray wear-resistant floor material Basic requirements:

The concrete strength of the grass-roots level shall be above C25, the water-cement ratio shall be controlled below 0.50, the difference between the concrete fall-out shall be controlled within 70-100mm, and the concrete mixture shall minimize segregation and control of bleeding; in order to ensure adequate flow of the concrete mixture Sex and construction are conducive to construction, it is recommended that concrete be added with proper additives. Grass-roots concrete should be poured and tamped with reference to the standard of fine concrete, pay attention to the size and reduce laitance production. The hardener surface is constructed simultaneously with the concrete structure layer. If the same leveling layer is to be applied at the same time, it is recommended that the leveling concrete should be fine stone concrete with a thickness of not less than 50mm. Consider configuring the telescopic reinforcement mesh with special attention to the corners of the concrete construction block. Ensure that the concrete in the area is vibrated and compacted and additional strengthening measures should be taken.Waterborne Epoxy Resin Floor.


Construction Instruction


Non-metallic Ground Hardener material Construction process:

Surface treatment: Use a machine equipped with a disc to evenly remove the laitance layer on the concrete surface; first spread the silicon carbide wear-resistant floor material: spread the prescribed amount of 2/3 hardened wear-resistant flooring material evenly. After the concrete surface of the initial coagulation stage, it is polished with a low-speed screeding machine;

Scratch ruler leveling: Use a 6m scraper to evenly and horizontally erase and rough level the corundum wear-resistant flooring material; second time spread the material: uniformly spread the prescribed amount of 1/3 color diamond abrasive wear-resistant flooring material. (After the surface of the first ground diamond abrasive wear-resistant floor material), it is polished again with a trowel; surface polishing: According to the hardening of the concrete, the angle of the blade on the polishing machine is adjusted, and the surface polishing operation is performed to ensure the surface flatness. Smooth finish; base surface expansion: Emery wear-resistant floor should be maintained on the surface within 4 to 6 hours after the completion of the construction to prevent the rapid evaporation of surface moisture and ensure a steady increase in the strength of the diamond abrasion resistant floor.Peacock Blue Waterborne Epoxy Resin Floor.


Dark Gray

Dark Gray Wear-resistant Floor

Dark Gray Wear-resistant Floor Material

Contact us if you need more details on Dark Gray Wear-resistant Floor. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dark Gray Wear-resistant Floor Material、Dark Grey Cement Wear-resistant Ground. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ground hardener system > Non-metallic Ground Hardener